Panasonic ZEQUO 2200 Operating Instructions Manual page 614

64. Voice VLAN Commands
64.1. enable voice_vlan
 Description
This command is used to enable the global voice VLAN function on a Switching Hub. To
enable the voice VLAN, the voice VLAN must be also assigned. At the same time, the VLAN
must be an existing static 802.1Q VLAN. To change the voice VLAN, the user must disable
the voice VLAN function, and re-issue this command. By default, the global voice VLAN
state is disabled.
 Format
enable voice_vlan [<vlan_name 32> | vlanid <vlanid 1-4094>]
 Parameters
<vlan_name 32>
Specify the name of the voice VLAN. The maximum length is 32 characters. The name
must be an existing static VLAN name.
vlanid Specify the VLAN ID of the voice VLAN. The ID must be an existing static VLAN ID.
<vlanid 1-4094>
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To enable voice VLAN named v2:
Zxxx0:admin#enable voice_vlan Voice
Command: enable voice_vlan Voice
Success.
Zxxx0:admin#
Specify the VLAN ID between 1 and 4094.
614