Panasonic ZEQUO 2200 Operating Instructions Manual page 177

21.1. config name_server add
 Description
This command is used to add a DNS resolver name server to the Switch.
 Format
config name_server add <ipaddr> {primary}
 Parameters
<ipaddr> Enter the DNS Resolver name server IP address used here.
primary (Optional) Specifies that the name server is a primary name server.
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To add DNS Resolver primary name server 10.10.10.10:
Zxxx0:admin# config name_server add 10.10.10.10 primary
Command: config name_server add 10.10.10.10 primary
Success.
Zxxx0:admin#
21.2. config name_server delete
 Description
This command is used to delete a DNS resolver name server from the Switch.
 Format
config name_server delete <ipaddr> {primary}
 Parameters
<ipaddr> Enter the DNS Resolver name server IP address used here.
primary (Optional) Specifies that the name server is a primary name server.
21. DNS Resolver Commands
177