Zxxx0:admin#show voice_vlan ports 1-3
Command: show voice_vlan ports 1-3
Ports
Status
Mode
-----
---------
--------
1
Disabled
2
Disabled
3
Disabled
Zxxx0:admin#
64.12. show voice_vlan voice_device
Description
This command is used to show voice devices that are connected to the ports. The start
time is the time when the device is detected on this port and the activate time is the
latest time when the device sends the traffic.
Format
show voice_vlan voice_device {ports <portlist>}
Parameters
<portlist>(Optional) Specify a range of ports to display.
If no parameter is specified, the system will display the connected Voice
device of all ports.
Restrictions
None.
Example
To display voice VLAN device ports 1 to 2:
Zxxx0:admin#show voice_vlan voice_device ports 1-2
Command: show voice_vlan voice_device ports 1-2
Ports
Voice Device
-----
-----------------
Total Entries : 0
Zxxx0:admin#
Auto
Auto
Auto
Start Time
----------------
64. Voice VLAN Commands
Last Active Time
-----------------
623