Panasonic ZEQUO 2200 Operating Instructions Manual page 338

38. MAC Notification Commands
 Parameters
<portlist>Specify a range of ports to be configured.
all Specify to set all ports in the system.
enable Specify to enable the port's MAC address table notification.
disable Specify to disable the port's MAC address table notification.
 Restrictions
Only Administrator and Operator-level users can issue this command.
 Example
To enable MAC address table notification for Port 7:
Zxxx0:admin#config mac_notification ports 7 enable
Command: config mac_notification ports 7 enable
Success.
Zxxx0:admin#
38.5. show mac_notification
 Description
This command is used to display the Switching Hub's MAC address table notification
global settings.
 Format
show mac_notification
 Parameters
None.
 Restrictions
None.
 Example
To show the Switching Hub's MAC address table notification global settings:
338