7. ARP Commands
Example
To display the ARP table:
Zxxx0:admin# show arpentry
Command: show arpentry
ARP Aging Time : 20
Interface
IP Address
-------------
---------------
System
10.0.0.0
System
10.90.90.90
System
10.255.255.255
Total Entries: 3
Zxxx0:admin#
7.6.
clear arptable
Description
This command is used to remove dynamic entries from the ARP table. Static ARP
entries are not affected.
Format
clear arptable
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To remove the dynamic entries from the ARP table:
Zxxx0:admin#clear arptable
Command: clear arptable
Success.
Zxxx0:admin#
MAC Address
Type
-----------------
---------------
FF-FF-FF-FF-FF-FF
Local/Broadcast
00-01-02-03-04-00
Local
FF-FF-FF-FF-FF-FF
Local/Broadcast
84