Table of Contents
Advertisement
4.4
SNMP
4.4.1
Use the following window to implement the settings on the SNMP group
table settings and display its settings. The SNMP group maps SNMP users
to SNMP view.
Choose Management > SNMP > SNMP Group Table Settings to display
the following window.
In the section of SNMP Group Settings, you can configure the following
parameters.
Group Name
Lead View Name
User-base Security
Model
Write View Name
SNMP Group Table Settings
Figure 4-4 SNMP Group Table Settings
Parameter
Enter the name of an SNMP group. The number of
characters can be up to 32 for the name. Do not use
any spaces for that.
Enter the lead-view name, which allows group-users to
access.
Choose a security model below. The options available
are as follows.
• SNMPv1 - This allows you to use the SNMPv1
• SNMPv2c - This allows you to use the SNMPv2c
• SNMPv3 - This allows you to use the SNMPv3
Enter a write view name so as group-users can access.
4.4 SNMP 4.4.1 SNMP Group Table Settings
Overview
security model for a group.
security model for a group.
security model for a group.
4 Management
53
Hide quick links:
Advertisement
Table of Contents
