Table of Contents
Advertisement
packet_content
Specify the packet content for the user defined mask.
offset_chunk_1
Specifies the contents of the offset trunk 1 to be monitored.
<hex 0x0-0xffffffff>
Enter the contents of the offset trunk 1 to be monitored here.
mask Specifies an additional mask for each field.
<hex 0x0-0xffffffff>
offset_chunk_2
Specifies the contents of the offset trunk 2 to be monitored.
<hex 0x0-0xffffffff>
Enter the contents of the offset trunk 2 to be monitored here.
mask Specifies an additional mask for each field.
<hex 0x0-0xffffffff>
offset_chunk_3
Specifies the contents of the offset trunk 3 to be monitored.
<hex 0x0-0xffffffff>
Enter the contents of the offset trunk 3 to be monitored here.
mask Specifies an additional mask for each field.
<hex 0x0-0xffffffff>
offset_chunk_4
Specifies the contents of the offset trunk 4 to be monitored.
<hex 0x0-0xffffffff>
Enter the contents of the offset trunk 4 to be monitored here.
mask Specifies an additional mask for each field.
<hex 0x0-0xffffffff>
ipv6
Specify that the rule applies to IPv6 fields.
class Specify the value of the IPv6 class.
<value 0-255>
Specify the value between 0 and 255.
flowlabel
Specify the value of the IPv6 flow label.
<hex 0x0-0xfffff>
Specify the value of the IPv6 flow label.
source_ipv6
Specify the value of the IPv6 source address.
<ipv6addr>
Specify the value of the IPv6 source address.
mask (Optional) Specify the mask.
<ipv6mask>
destination_ipv6
Specify the value of the IPv6 destination address.
<ipv6addr>
Specify the value of the IPv6 destination address.
mask (Optional) Specify the mask.
<ipv6mask>
Enter the additional mask value used here.
Enter the additional mask value used here.
Enter the additional mask value used here.
Enter the additional mask value used here.
Specify the mask.
Specify the mask.
63
6. Access Control List (ACL) Commands
Advertisement
Table of Contents
