Panasonic ABJ Specification Sheet

6
12.8
6.5
Dust protected type
Immersion protected type
(wire leads bottom type)
Immersion protected
(wire leads side type)
Compliance with RoHS Directive

ORDERING INFORMATION

(If Agency standard required, please refer to the "with Agency standard type". See next page.)
Type of Size of
switch mounting hole
ABJ: 1: 1.2 mm
Turquoise 2: 2.3 mm
switch 3: 3 mm
J type 4: Fixed pin
(right side pin) type
5: Fixed pin
(left side pin) type
Remarks: 1. Standard packing: Dust protected type 100 pcs./carton, 2,000 pcs./case; Immersion protected type 50 pcs./case.
2. Not every combination is available. Please refer to the following table, "PRODUCT TYPES".
HIGH ENVIRONMENTAL
RESISTANCE
FEATURES
• Ultra-miniature size (12.8×6.5×6 mm)
• Sealed construction for use in adverse environment-Sealed
construction by epoxy resin and rubber cap greatly reduces possible
miscontact due to contaminants such as dust. Conforming to IP67* of
IEC protective construction classification
(Mounting hole
• Elastomer double molding technology, an industry first and ultrasonic
2.3mm type)
swaging technology contribute to uniform sealing in high production
quantities
• UL/CSA approved (Except the long stroke type of ABJ2 and the side
wire leads type.)
• Long stroke type is available
Since the repeatability is excellent and the play distance (overtravel) from
the operating position is ample, the task of performing adjustments during
installation is easy.
(Mounting hole
Operating position accuracy ±0.4 mm
2.3mm type)
Overtravel= Min. 2.0 mm
As wide range of high pressure is achieved, a stable reliability is ensured
• Leaf lever side wire leads type added. We now offer two types.
M3 type installation hole
Fixed pin type

TYPICAL APPLICATIONS

Long stroke type
• Industrial use video jack
• Automotive (ex. Device for opening and shutting of automobile doors)
* Based on the protective construction classification of IEC, items which
satisfy the test requirements are denoted with an IP designation.
Ex. ABJ 1
Terminal
4: Solder terminal
5: PC board terminal
6: Wire leads (bottom type)
7: Wire leads (right side type)
8: Wire leads (left side type)
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
4 1 0 4 0
Contact
Actuator
arrangement
1: SPDT 0: Pin plunger
2: SPST-NC 2: Hinge lever
(Wire leads 4: Simulated roller lever
type only) 6: Roller lever
3: SPST-NO 8: Leaf lever
(Wire leads (Mounting hole 3 mm
type only) lead wire type only)
L: Long stroke type
ABJ1,2,3,4,5
TURQUOISE SWITCHES
ABJ TYPE
Operating force
by pin plunger
(max.)
4: 1.23 N
6: 1.96 N
7: 2.45 N
(Long stroke
type only)
Contact
0: AgNi alloy
1: AgNi alloy
+ Au clad