Panasonic ZEQUO 2200 Operating Instructions Manual page 488

51. Ring Redundant Protocol (RRP) Commands
 Restrictions
Only Administrator and Operator-level users can issue this command.
 Example
To crete the "pc-ring" domain settings to node type=Transit, control VLAN=30, primary
port=9, secondary port=10, data VLAN=1, polling interval=1, and fail period=2:
Zxxx0:admin# create rrp domain pc-ring type transit control_vlan_id 30 primary_port
9 secondary_port 10 data_vlan_id 1 polling_interval 1 fail_period 2
Command: create rrp domain pc-ring type transit control_vlan_id 30 primary_port 9
secondary_port 10 data_vlan_id 1 polling_interval 1 fail_period 2
Success.
Zxxx0:admin#
51.3. delete rrp domain
 Description
This command is used to delete the RRP domain.
 Format
delete rrp domain <domain name>
 Parameters
<domain name>
Specify the RRP domain name to delete.
 Restrictions
Only Administrator and Operator-level users can issue this command.
 Example
To delete the "pc-ring" domain:
Zxxx0:admin# delete rrp domain pc-ring
Command: delete rrp domain pc-ring
Success.
Zxxx0:admin#
488