Panasonic ZEQUO 2200 Operating Instructions Manual page 206

24. File System Management Commands
24.10. move
 Description
This command is used to move a file around the file system. Note that when a file is
moved, it can be specified whether to be renamed at the same time.
 Format
move {{unit <unit_id>} <drive_id>} <pathname> {{unit <unit_id>} <drive_id>}
<pathname>
 Parameters
unit Specifies the unit ID in the stacking system. If not specified, it refers to the master unit.
<unit_id>
Enter the unit ID value here.
<drive_id>
Specifies the drive ID. If not specified, it refers to the current drive.
<pathname>
Specify the file to be moved. The path name can be specified either as a full path name or
partial name. For a partial path name, it indicates the file is in the current directory.
unit Specifies the unit ID in the stacking system. If not specified, it refers to the master unit.
<unit_id>
Enter the unit ID value here.
<drive_id>
Specifies the drive ID. If not specified, it refers to the current drive.
<pathname>
Specify the new path where the file will be moved. The path name can be specified either
as a full path name or partial name. For a partial path name, it indicates the file is in the
current directory.
 Restrictions
Only Administrator and Operator-level users can issue this command.
 Example
To move a file or directory:
Zxxx0:admin#move c:/log.txt c:/abc/log1.txt
Command: move c:/log.txt c:/abc/log1.txt
Success.
Zxxx0:admin#
206