Panasonic ZEQUO 2200 Operating Instructions Manual page 433

45.20. show syslog source_ipif
 Description
This command is used to display the syslog source IP interface.
 Format
show syslog source_ipif
 Parameters
None.
 Restrictions
None.
 Example
To display the syslog source interface:
Zxxx0:admin#show syslog source_ipif
Command: show syslog source_ipif
Syslog Source IP Interface Configuration:
IP Interface
IPv4 Address
IPv6 Address
Zxxx0:admin#
45.21. show attack_log
 Description
This command is used to display the Switching Hub's attack log.
 Format
show attack_log {index <value_list>}
 Parameters
index (Optional) Specify the list of index of the entries that need to be displayed.
<value_list>
Specify the list of index of the entries that need to be displayed. For example, show
attack_log index 1-5 will display the attack log messages from 1 to 5.
: System
: None
: None
433
45. Network Monitoring Commands