Panasonic ZEQUO 2200 Operating Instructions Manual page 356

39. MAC-based Access Control Commands
Zxxx0:admin#show mac_based_access_control ports 1-4
Command: show mac_based_access_control ports 1-4
Port State Aging Time
----- -------- ----------
1 Disabled 1440
2 Disabled 1440
3 Disabled 1440
4 Disabled 1440
Zxxx0:admin#
39.17. show mac_based_access_control_local
 Description
This command is used to display MAC-based access control local data.
 Format
show mac_based_access_control_local {[mac <macaddr> | vlan <vlan_name 32> |
vlanid <vlanid 1-4094>]}
 Parameters
mac (Optional) Display MAC-based access control local databases by this MAC address.
<macaddr>
Enter the MAC address here.
vlan (Optional) Specify the VLAN.
<vlan_name 32>
Specify the VLAN name up to 32 characters long.
vlanid (Optional) Specify the VLAN ID.
<vlanid 1-4094>
Specify the VLAN ID value between 1 and 4094.
 Restrictions
None.
 Example
To display MAC-based access control local data:
Block Time
(min) (sec)
---------
300
300
300
300
356
Max User
--------
1024
1024
1024
1024