Panasonic ZEQUO 2200 Operating Instructions Manual page 201

 Parameters
unit Specifies the unit ID in the stacking system. If not specified, it refers to the master unit.
<unit_id>
Enter the unit ID value here.
<drive_id>
Specifies the drive ID. If not specified, it refers to the current drive.
<pathname>
(Optional) Specify the directory to be listed. The path name can be specified either as a
full path name or partial name. For a partial path name, it indicates the file is in the
current directory. The drive ID also included in this parameter, for example: d:/config/
bootup.cfg.
 Restrictions
None.
 Example
To list a directory:
Zxxx0:admin#dir
Command: dir
Directory of c:/
Idx Info Attr Size
--- ------- ---- -------- -------------------- ----
1 RUN(*) -rw- 4796564
2 CFG(*) -rw- 24120
3 CFG(b) -rw- 24120
4 d---
30608 KB total (25700 KB free)
(*) -with boot up info
Zxxx0:admin#
To list a system directory:
Zxxx0:admin#dir c:/system
Command: dir c:/system
System reserved directory. Used space 89KB.
Zxxx0:admin#
24. File System Management Commands
Update Time
2000/01/22 03:52:03
2000/01/22 23:22:58
2000/01/23 06:59:39
2000/01/23 22:52:50
(b) -with backup info
201
Name
runtime.rom
config.cfg
1
system