19. DHCP Snooping Commands
19.1. enable dhcp_snoop
Description
This command is used to enable DHCP snooping operation on the Switching Hub. This
is a global control for the DHCP snooping function. By default, the DHCP snooping
function is disabled.
Format
enable dhcp_snoop
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable the DHCP snooping function globally:
Zxxx0:admin#
enable dhcp_snoop
Command: enable dhcp_snoop
Success.
Zxxx0:admin#
166