Panasonic ZEQUO 2200 Operating Instructions Manual page 265

<ipv6addr>
Specify the IPv6 address of the neighbor.
<macaddr>
Specify the MAC address of the neighbor.
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To add a static entry into the NDP table:
Zxxx0:admin#create ipv6 neighbor_cache ipif System 3ffc::1 00:01:02:03:04:05
Command: create ipv6 neighbor_cache ipif System 3FFC::1 00-01-02-03-04-05
Success.
Zxxx0:admin#
30.2. delete ipv6 neighbor_cache ipif
 Description
This command is used to delete a neighbor cache entry or static neighbor cache
entries from the address cache or all address cache entries on this IP interface. Both
static and dynamic entries can be deleted.
 Format
delete ipv6 neighbor_cache ipif [<ipif_name 12> | all] [<ipv6addr> | static | dynamic |
all]
 Parameters
<ipif_name 12>
Specify the IPv6 interface name.
all Specify all IPv6 interfaces.
<ipv6addr>
Specify the IPv6 address of the neighbor.
static Specify to delete the IPv6 static entries.
dynamic Specify to delete the IPv6 dynamic entries.
all Specify all IPv6 entries, including static and dynamic, to be deleted.
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
30. IPv6 NDP Commands
265