<class_id 0-7>
Specify the number of the Switching Hub's hardware priority queue. The Switching Hub
has eight hardware priority queues available. They are numbered between 0 (the lowest
priority) and 7 (the highest priority).
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure an 802.1p user priority of 1 map to class ID of 3:
Zxxx0:admin#config 802.1p user_priority 1 3
Command: config 802.1p user_priority 1 3
Success.
Zxxx0:admin#
50.10. show 802.1p user_priority
Description
This command is used to display 802.1p user priority.
Format
show 802.1p user_priority
Parameters
None.
Restrictions
None.
473
50. QoS Commands