Show Arpentry - Panasonic ZEQUO 2200 Operating Instructions Manual

 Example
To configure the ARP aging time:
Zxxx0:admin#config arp_aging time 30
Command: config arp_aging time 30
Success.
Zxxx0:admin#
7.5.

show arpentry

 Description
This command is used to display the Address Resolution Protocol (ARP) table. Filter
the display by IP address, interface name, or static entries.
 Format
show arpentry {ipif <ipif_name 12> | ipaddress <ipaddr> | static | mac_address
<macaddr>}
 Parameters
ipif The name of the IP interface the end node or station for which the ARP table entry was
made, resides on.
<ipif_name 12>
Specify the IP interface name. The maximum length is 12 characters.
ipaddress
The IP address of the end node or station.
<ipaddr>
Specify the IP address.
static Displays the static entries to the ARP table.
mac_address
Displays the ARP entry by MAC address.
<macaddr>
Specify the MAC address.
If no parameter is specified, all ARP entries will be displayed.
 Restrictions
None.
83
7. ARP Commands