9.2.
enable autoconfig
Description
This command is used to enable automatically to get configuration from a TFTP server
according to the options in the DHCP reply packet. To employ this method, the DHCP
server must be set up to deliver the TFTP server IP address and configuration file
name information first.
Format
enable autoconfig
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To enable DHCP auto configuration status:
Zxxx0:admin#enable autoconfig
Command: enable autoconfig
Success.
Zxxx0:admin#
9.3.
disable autoconfig
Description
This command is used to disable automatically to get configuration from a TFTP
server.
Format
disable autoconfig
Parameters
None.
9. Auto Configuration Commands
91