Config Stp Ports - Panasonic ZEQUO 2200 Operating Instructions Manual

Switching hub
Table of Contents

Advertisement

 Parameters
maxage Specify to determine if a BPDU is valid.
<value 6-40>
Specify to determine if a BPDU is valid. The default value is 20.
maxhopsSpecify to restrict the forwarded times of one BPDU.
<value 6-40>
Specify to restrict the forwarded times of one BPDU. The default value is 20.
hellotimeSpecify the time interval for sending Configuration BPDUs by the Root Bridge. This
parameter is for STP and RSTP version. MSTP version uses per-port hellotime parameter.
<value 1-2>
Specify the time interval for sending Configuration BPDUs by the Root Bridge. This
parameter is for STP and RSTP version. MSTP version uses per-port hellotime
parameter. The default value is 2 seconds.
forwarddelay
Specify the maximum delay time for one BPDU to be transmitted by a bridge and
received from another bridge.
<value 4-30>
Specify the maximum delay time for one BPDU to be transmitted by a bridge and
received from another bridge. The default value is 15.
txholdcount
Specify to restrict the numbers of BPDU transmitted in a time interval (per Hello Time).
<value 1-10>
Specify to restrict the numbers of BPDU transmitted in a time interval (per Hello
Time).
fbpdu
To decide if the Bridge will flood STP BPDU when STP functionality is disabled.
enable
Specify to enable FBPDU.
disable
Specify to disable FBPDU.
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To configure STP:
Zxxx0:admin# config stp maxage 25
Command: config stp maxage 25
Success.
Zxxx0:admin#

54.14. config stp ports

 Description
54. Spanning Tree Protocol (STP) commands
537

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pn26241Zequo 2210 pn26161

Table of Contents