Example
To display the LLDP management address:
Zxxx0:admin#show lldp mgt_addr
Command: show lldp mgt_addr
Address 1 :
------------------------------------------------------
Subtype
Address
IF Type
OID
Advertising Ports
Total Entries : 1
Zxxx0:admin#
36.19. show lldp remote_ ports
Description
This command is used to display the information learned from the neighbor
parameters.
Format
show lldp remote_ports {<portlist>} {mode [brief | normal | detailed]}
Parameters
<portlist>(Optional) Specify the ports to be displayed. When a port list is not specified, information
for all ports will be displayed.
mode
(Optional) Select the mode: brief, normal, or detailed.
brief
Specify to display the information in brief mode.
normal Specify to display the information in normal mode. This is the default display
mode.
detailed Specify to display the information in detailed mode.
Restrictions
None.
: IPv4
: 10.19.72.38
: Unknown
: 1.3.6.1.4.1.396.5.4.1.xx
:
327
36. LLDP Commands