43. Network Load Balancing (NLB) Commands
<macaddr>
Specifies the MAC address of the NLB multicast FDB entry to be created.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To create a NLB multicast FDB entry:
Zxxx0:admin# create nlb multicast_fdb default 03-bf-01-01-01-01
Command: create nlb multicast_fdb default 03-bf-01-01-01-01
Success.
Zxxx0:admin#
43.2. delete nlb multicast_fdb
Description
This command is used to delete the Switch's NLB multicast FDB entry.
Format
delete nlb multicast_fdb [<vlan_name 32> | vlanid <vlanid>] <macaddr>
Parameters
<vlan_name 32>
Enter the VLAN name of the NLB multicast FDB entry here. This name can be up to 32
characters long.
vlanid
Specifies the VLAN ID used.
<vlanid>
Enter the VLAN ID used here.
<macaddr>
Specifies the MAC address of the NLB multicast FDB entry to be deleted.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete NLB multicast FDB entry:
392