16. Network Access Authentication Command List
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
Set authentication server auth fail over state:
Zxxx0:admin# config authentication server failover local
Command: config authentication server failover local
Success.
Zxxx0:admin#
16.8. show authentication
Description
This command is used to display authentication global configuration.
Format
show authentication
Parameters
None.
Restrictions
None.
Example
To show authentication global configuration:
Zxxx0:admin# show authentication
Command: show authentication
Authentication Server Failover: Block.
Zxxx0:admin#
130