Example
To display a port security entry:
Zxxx0:admin#show port_security_entry
Command: show port_security_entry
MAC Address
-----------------
00-00-00-00-00-01
Total Entry Number: 1
Zxxx0:admin#
47.7. show port_security
Description
This command is used to display the port security related information of the
Switching Hub ports including the port security admin state, the maximum number of
learning addresses, and the lock mode.
Format
show port_security {ports {<portlist>} {[vlan <vlan_name 32> | vlanid <vidlist>]}}
Parameters
ports
(Optional) Specify a range of ports to be displayed.
<portlist>
Specify a range of ports to be displayed.
vlan
(Optional) Specify a VLAN to display its configuration.
<vlan_name 32>
Specify the VLAN name. The maximum length is 32 characters.
vlanid
(Optional) Specify a VLAN list to display the configuration.
<vidlist>
Specify a list of VLAN ID.
Restrictions
None.
VID
Port
Lock Mode
---
----
----------
1
25
DeleteOnTimeout
47. Port Security Commands
449