Authorization Attributes - Panasonic ZEQUO 2200 Operating Instructions Manual

39.12. config mac_based_access_control
max_users
 Description
This command is used to configure the MAC-based access control maximum number
of authorized users.
 Format
config mac_based_access_control max_users [<value 1-4000> | no_limit]
 Parameters
<value 1-4000>
Specify the maximum number of authorized users.
no_limit
Specify an unlimited number(4000) of users.
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To configure the MAC-based access control maximum number of authorized users:
Zxxx0:admin#config mac_based_access_control max_users 2
Command: config mac_based_access_control max_users 2
Success.
Zxxx0:admin#
39.13. config mac_based_access_control

authorization attributes

 Description
This command is used to enable or disable the acceptance of an authorized
configuration. When authorization is enabled for MAC-based access controls with
RADIUS authentication, the authorized attributes (for example VLAN, 802.1p default
priority, and ACL) assigned by the RADUIS server will be accepted if the global
authorization status is enabled. When authorization is enabled for MAC-based access
controls with local authentication, the authorized attributes assigned by the local
database will be accepted.
39. MAC-based Access Control Commands
351