Panasonic ZEQUO 2200 Operating Instructions Manual page 552

56. Static MAC-based VLAN Commands
vlan Specify the VLAN to be associated with the MAC address. The name must be an existing
static VLAN name.
<vlan_name 32>
Specify the VLAN name. The maximum length is 32 characters.
vlanid Specify the VLAN ID to be associated with the MAC address. The ID must be an existing
static VLAN ID.
<vlanid 1-4094>
Specify the VLAN ID between 1 and 4094.
priority (Optional) Specifies the priority that is assigned to untagged packets. If not specified, the
priority is the default value 0.
<value 0-7>
Enter the priority value used here. This value must be between 0 and 7.
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To create a static MAC-based VLAN entry:
Zxxx0:admin#create mac_based_vlan mac_address 00-00-00-00-00-01 vlan default
Command: create mac_based_vlan mac_address 00-00-00-00-00-01 vlan default
Success.
Zxxx0:admin#
56.2. delete mac_based_vlan
 Description
This command is used to delete static MAC-based VLAN entries.
 Format
delete mac_based_vlan {mac_address <macaddr> [vlan <vlan_name 32>| vlanid
<vlanid 1-4094>]}
 Parameters
mac_address
(Optional) Specify the MAC address to be deleted.
<macaddr>
Specify the MAC address to be deleted.
vlan (Optional) Specify the VLAN associated with the MAC address.
<vlan_name 32>
Specify the VLAN name. The maximum length is 32 characters.
vlanid (Optional) Specify the VLAN ID associated with the MAC address.
<vlanid 1-4094>
Specify the VLAN ID between 1 and 4094.
552