Panasonic ZEQUO 2200 Operating Instructions Manual page 287

 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To create a multicast address profile named MOD:
Zxxx0:admin#create mcast_filter_profile profile_id 2 profile_name MOD
Command: create mcast_filter_profile profile_id 2 profile_name MOD
Success.
Zxxx0:admin#
34.2. config mcast_filter_profile
 Description
This command is used to modify the profile name, add or delete a range of previously
defined multicast IP addresses to or from the profile.
 Format
config mcast_filter_profile [profile_id <value 1-60> | profile_name <name 32>]
{profile_name <name 32> | [add | delete] <mcast_address_list>}(1)
 Parameters
profile_idSpecify the ID of the profile.
<value 1-60>
The profile ID must be between 1 and 60.
profile_name
Specifies the name of the profile.
<name 32>
The profile name can be up to 32 characters long.
profile_name
Specify a new name of the profile.
<name 32>
The profile name can be up to 32 characters long.
add Specify to add a range of multicast IP addresses.
deleteSpecify to delete a range of multicast IP addresses.
<mcast_address_list>
List of the multicast addresses to be added to or deleted from the profile.
Either specifiy a single multicast IP address or a range of multicast addresses
using a hyphen.
34. Limited Multicast IP Address Commands
287