Panasonic ZEQUO 2200 Operating Instructions Manual page 458

49. Protocol VLAN Commands
 Parameters
group_id(Optional) Specify the group ID to be displayed.
<id> Specify the group ID to be displayed.
group_name
(Optional) Specify the name of the protocol group.
<name 32>
Specify the name of the protocol group. The maximum length is 32 characters.
If no parameter is specified, all configured protocol groups will be
displayed.
 Restrictions
None.
 Example
To display protocol group ID 4:
Zxxx0:admin# show dot1v_protocol_group group_id 4
Command: show dot1v_protocol_group group_id 4
Protocol Protocol
Group ID Group Name
--------- ---------------
4 General Group
Total Entries: 1
Zxxx0:admin#
49.5. config port dot1v ports
 Description
This command is used to assign the VLAN for untagged packets ingress from the
portlist based on the protocol group configured. This assignment can be removed by
using the delete protocol_group option.
When priority is not specified in the command, the port default prority will be the
priority for those untagged packets classified by the protocol VLAN.
 Format
config port dot1v ports [<portlist> | all] [add protocol_group [group_id <id>|
group_name <name 32>] [vlan <vlan_name 32> | vlanid <id>] {priority <value 0-7>} |
delete protocol_group [group_id <id> | all]]
Frame Type
------------
EthernetII
458
Protocol
Value
------------
86dd