Panasonic ZEQUO 2200 Operating Instructions Manual page 607

63.18. traceroute
 Description
This command is used to trace a route between the Switching Hub and a given host
on the network.
 Format
traceroute [<ipaddr> | <domain_name 255>] {ttl <value 1-60> | port <value 30000-
64900> | timeout <sec 1-65535> | probe <value 1-9>}
 Parameters
<ipaddr>Specify the IP address of the destination end station.
<domain_name 255>
Specify the domain name of the destination end station.
ttl (Optional) Specify the time to live value of the trace route request.
<value 1-60>
Specify the time to live value of the trace route request. This is the maximum
number of routers that a trace route packet can pass while seeking the network
path between two devices. The range for the TTL is 1 to 60 hops. The default value
is 30.
port (Optional) Specify the port number.
<value 30000-649000>
Specify the port number. The value range is from 30000 to 64900. The default is
33435.
timeout (Optional) Specify the timeout period while waiting for a response from the remote
device.
<sec 1-65535>
Specify the timeout period while waiting for a response from the remote device. A
value of 1 to 65535 seconds can be specified. The default is 5 seconds.
probe (Optional) Specify the number of probes.
<value 1-9>
Specify the number of probes. The range is from 1 to 9. If unspecified, the default
value is 1.
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To trace the route path between the Switching Hub and 10.48.74.121:
607
63. Utility Commands