Panasonic ZEQUO 2200 Operating Instructions Manual page 379

41.9. clear mld_snooping statistics counter
 Description
This command is used to clear the MLD snooping statistics counters.
 Format
clear mld_snooping statistics counter
 Parameters
None.
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To clear the MLD snooping statistics counters:
Zxxx0:admin#clear mld_snooping statistics counter
Command: clear mld_snooping statistics counter
Success.
Zxxx0:admin#
41.10. config mld_snooping querier
 Description
This command is used to configure the time, in seconds, between general query
transmissions, the maximum time to wait for reports from listeners, and the permitted
packet loss that guarantees MLD snooping.
 Format
config mld_snooping querier [vlan_name <vlan_name 32> | vlanid <vlanid_list> | all]
{query_interval <sec 1-65535> | max_response_time <sec 1-25> | robustness_variable
<value 1-7> | last_listener_query_interval <sec 1-25> | state [enable | disable] | version
<value 1-2>} (1)
41. MLD Snooping Commands
379