SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 5

DI0A-6
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
7. Plug the removed components with clean and
8. Clear the high pressure offset value by Scan-100 after
Y220_0A040
9. To supply the fuel to transfer line of HP pump press
Priming pump
Y220_0A041
10. Check the installed components again and connect
11. With Scan-i, check if there are current faults and erase
Y220_0A042
undamaged sealing caps and store it into the box to
keep the conditions when it was installed.
replacing the high pressure pump.
the priming pump until it becomes hard.
Warning
Do not crank engine before having filled pump.
the negative battery cable. Start the engine and check
the operating status.
the history faults.
Note
For details, refer to "DI10 Diagnosis teable".
GENERAL INFORMATION
DI ENG SM - 2004.4