During Service Work - Inspection - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

During Service Work - Inspection

1. Before lifting up the vehicle with lift, correctly support the
lifting points and lift up.
2. When using a jack, park the vehicle on the level ground
and block front and rear wheels. Position the jack under
the frame and lift up the vehicle and then support with
chassis stand before service work.
3. Before service work, be sure to disconnect battery
negative (-) terminal to prevent damages by bad wire and
short.
4. If service from interior of the vehicle, use protection cover
to prevent damage and contamination of seat and floor.
5. Brake fluid and anti-freeze can damage painted surface
of body. So carefully handle them during service work.
6. Use recommended and specified tools to increase
efficiency of service work.
7. Use only genuine spare parts.
GENERAL INFORMATION
DI ENG SM - 2004.4
DI0A-33
Y220_0A025
Y220_0A026
Y220_0A027
Y220_0A028
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN