Lifting Points; Lifting Positions; 4-Post Lift; Safety Jack And Safety Stand - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

DI0A-36

LIFTING POINTS

Lifting Positions

1. 4-post lift

As illustrated, position the vehicle on the 4-post lift securely and block the front and rear of each tire not to move during
working.
Notice
During lifting, be sure to check whether vehicle is empty.
• Board-on lift connection device installed in front of vehicle should be positioned in front of sill locating
under the front door.
• Install lift connecting device on the edge of front and rear of board-on lift.
Warning
• Be sure to use attachment during lifting to prevent the lift from contacting with body floor.
• While lifting the vehicle, widen the lift floor as far as possible to stabilize between vehicle front and rear. When
fixing the lift floor, be careful not to contact with brake tube and fuel lines.

2. Safety jack and safety stand

If lift up the vehicle with safety jack and stand, should be more
careful during works.
Warning
• Never be under the vehicle if supported with only jack.
If have to be under the vehicle, be sure to use safety
block.
• Use wheel block in front and rear of every wheel.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
Y220_0A033
GENERAL INFORMATION
DI ENG SM - 2004.4