Maintenance Of Transfer Case Lubricant - SSANGYONG Y200 Manual

5D1-20 PART TIME - T/C
MAINTENANCE AND REPAIR
YAD5D220
YAD5D230
ON-VEHICLE SERVICE
MAINTENANCE OF TRANSFER
CASE LUBRICANT
1. Oil Level Check
•
Clean the oil level plug and surrounding area.
•
Remove the oil level plug and check whether
oil is drip out or not.
•
Tighten the oil level plug.
Installation Notice
Tightening Torque
2. Oil Change
•
Clean the oil level plug and surrounding area
•
Place a suitable container under the transfer
case.
•
Remove the oil and tighten the drain plug.
•
Fill the oil through the oil level plug until oil
begins to drip out.
•
Tighten the oil level plug.
3. Cautions for oil level check and plugs tightening
•
Do not use an impact wrench to remove or
tighten the oil level plug or drain plug since this
will damage the threads in the transfer case.
20 - 30 N•m
(15 - 22 lb-ft)
SSANGYONG Y200