Table of Contents
Advertisement
HOW TO DRAIN THE WATER FROM FUEL FILTER
1. Fuel filter
2. Drain plug
3. Connector
4. Priming pump
A. Opening direction
of drain plug
B. Closing direction of
drain plug
5-14
Page 14
(Without Additional Water Separator)
1. Locate the fuel filter ( ) in engine compartment
and place the water container under it.
2. Disconnect the connector ( ) under the drain plug
( ) of the water separator.
3. Turn the drain plug ( ) to " " direction to drain
the water.
4. Press priming pump until all water is drained. Af-
ter draining, turn the drain plug until the gasket
contact to the threaded plug hole, then tighten
(" " direction) it 1/2 turns by hand.
5. Engage the connector ( ) under the drain plug and
press the priming pump ( ) until it becomes rigid.
6. Close the engine hood and start the engine.
DIESEL ONLY
WARNING
If the priming pump is not properly operated,
air may get into the fuel line. It may cause
starting problem or fuel system problem.
Make sure to perform the job in step 5.
CAUTION
Be carefule not to be injured by sur-
rounding equipment during the working
procedures.
2006-10-02, ¿ÀÀü 11:05
Hide quick links:
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the RODIUS and is the answer not in the manual?
Questions and answers
hand brake broken
To fix a broken hand brake on a SSANGYONG RODIUS, you can use a parking brake repair kit designed for the vehicle. The kit typically includes parts like caliper components, brake blocks, and gear actuators. These parts are used to repair or replace damaged components in the electric parking brake system. Ensure the correct repair kit (such as CLS-00259) is used. Note that auto parts changed by the user may not be covered under warranty.
This answer is automatically generated