Table 32: Show Community Output Fields - Alcatel-Lucent 7450 System Management Manual

Sample Output

Table 32: Show Community Output Fields

Note: The system-created communities that begin with "cli-" are only used for internal CLI
management purposes and are not exposed to external SNMP access.
A:ALA-1# show system security snmp community
==============================================================================
Communities
==============================================================================
community
------------------------------------------------------------------------------
cli-li-readwrite
cli-readonly
cli-readwrite
my-private1
my-public2
test-123
------------------------------------------------------------------------------
No. of Communities: 6
==============================================================================
A:ALA-1#
A:ALA-1# show system security snmp community "my-public2"
==============================================================================
7450 ESS System Mangement Guide
Label
Community
Access
View
Version
Group Name
src-access-list
authFailures
No of Communities
access
n/a
r
rw
rw
r
rwa
The community string name for SNMPv1 and SNMPv2c access only.
r — The community string allows read-only access.
rw — The community string allows read-write access.
rwa — The community string allows read-write access.
mgmt — The unique SNMP community string assigned to the man-
agement router.
The view name.
The SNMP version.
The access group name.
The name of the list of source IP addresses that are allowed to use the
community, as configured using the community configuration com-
mand.
The number of SNMP requests that have failed validation using this
community.
The total number of configured community strings.
view
li-view
iso
iso
iso
no-security
n/a
Description
version group name
v2c cli-li-readwrite
v2c cli-readonly
v2c cli-readwrite
v1 v2c snmp-rwa
v1 v2c snmp-ro
v2c snmp-trap
SNMP
Page 325