Renault Laguna III Manual page 2639

Compressor - condenser connecting pipe: Removal - Refitting
F4R or K4M or K9K or M4R or M9R, and AIR CONDITIONING 01 or AIR CONDITIONING 02
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Remove the nut (1) securing the bracket of the com-
pressor - condenser connecting pipe from the con-
denser.
a Disconnect the condenser - compressor connecting
pipe from the condenser.
a Insert the blanking plugs.
AIR CONDITIONING
122867
62A-83
a Remove the bolt (2) securing the bracket for the
compressor - condenser connecting pipe from the
compressor.
Disconnect the compressor - condenser connecting
pipe from the compressor.
a Insert the blanking plugs.
a Remove the compressor - condenser connecting
pipe from underneath.
REFITTING
I - REFITTING PREPARATION OPERATION
a Always replace the seals on the refrigerant fluid con-
necting pipes.
WARNING
Do not remove the blanking plugs from each
component until the last moment.
Also, do not remove the components from their
packaging until they are to be fitted to the vehi-
cle.
a Remove the plugs from the cold loop openings.
62A
122876