Chevrolet 10 Series 1970 Service Manual page 346

ENGINE 6-24
to ra ise because o f the lim ited clearan ce b e­
tween the brake and transm ission hole c o ver.
4. P la c e new upper mount in place on fram e m em ber,
then lo w er engine to within 1/4 inch o f mount.
5. A lign mount so that guide dowel enters hole in mount,
F ig . 21 L—Engine M ounts
install bolt through french lock, lo w e r mount and
spacer, then install bolt up through fram e, upper
mount and thread into engine b ell housing lo o sely.
6. L o w er engine
then bend tabs of french lock to lock the bolt in place.
com pletely and tighten mount bolt,
CHEVROLET TRUCK SERVICE MANUAL