Fig 2-21 Trays 3, 4, And 5 Paper Level Sensors; Rrp 2-16Trays 3, 4, And 5 Paper Level Sensors (Pl 12.3~Pl 12.4) - Xerox DOCUPRINT N4525 Service Quick Reference Manual

RRP 2-16Trays 3, 4, and 5 Paper Level Sensors
(PL 12.3~PL 12.4)
Paper Level Sensor

Fig 2-21 Trays 3, 4, and 5 Paper Level Sensors

Use this procedure for removing and replacing the Paper Level Sensors for Trays 3, 4, and
5.
Removal
1.
Remove the Paper Tray associated with the Paper Level Sensor you are going
to remove.
2.
Squeeze the Sensor latches and remove the Paper Level Sensor from the
frame.
3.
Disconnect the P/J from the Sensor.
Replacement
1.
Reconnect the P/J to the Sensor.
2.
Position the Sensor with the arms of the Sensor facing the Feed Assembly
Actuator.
3.
Reinstall the Paper Level Sensor into the slot in the frame by first inserting the
front latch of the Sensor through the front opening in the frame.
4.
Press in on the rear latch and inserting it into the rear opening.
5.
Release the rear latch and the Sensor snaps into place.
6.
Release the Actuator and make sure it moves freely between the arms of the
Sensor.
7.
Reconnect the P/J to the Sensor.
8.
Reinstall the Paper Tray.
2-434 DocuPrint N4525 Network Printer - Service Guide