Rep 13.9 No Paper Actuator; Rep 13.10 No Paper Sensor - Xerox DocuPrint N2125 Service Manual

REP 13.9 No Paper Actuator

Parts List on PL 12.2
Removal
Switch off the power and disconnect the Power Cord.
1. Remove the Envelope Feeder from the printer.
2. Remove the Bottom Cover (REP 13.1).
3. Carefully pry up on the hinge pins to remove the actuator from the mounting
4. Rotate the No Paper Actuator up to remove
Figure 1 No Paper Actuator
Replacement
1. Reinstall the components in the reverse order.
Initial Issue
DocuPrint N2125
WARNING
(Figure 1).

REP 13.10 No Paper Sensor

Parts List on PL 12.2
Removal
Switch off the power and disconnect the Power Cord.
1. Remove the Envelope Feeder from the printer.
2. Remove the Bottom Cover
(Figure 1). 3. Remove the No Paper Actuator
4. Release the three locking tabs that secure the No Paper Sensor
5. Disconnect P/J415 from the sensor
Replacement
1. Reinstall the components in the reverse order.
02/2000
4-107
WARNING
(REP 13.1).
(REP 13.9).
(Figure
(Figure 1).
Figure 1 No Paper Sensor
REP 13.9, REP 13.10
1).
Repair-Adjustment