Show Command-Tree - Dell S4810 Reference Manual

show command-tree

Display the entire CLI command tree, and optionally, display the utilization count for each command and
its options.
S4810
Syntax
show command-tree [count | no]
Parameters
count
no
Defaults none
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version 9.0.0.0
Version
8.3.19.0
Version
8.3.12.0
Version 8.3.11.1
Version 8.2.1.0
Usage Reload the system to reset the command-tree counters.
Information
Example
Dell#show command-tree count
!
Enable privilege mode:
enable command usage:3
exit
show
count option usage: 3
show version command usage:1
Control and Monitoring
Display the command tree with a usage counter for each
command.
Display all of the commands that may be preceded by the
keyword no, which is the keyword used to remove a
command from the running-configuration.
EXEC
EXEC Privilege
Introduced on the S6000.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced.
<0-15> option usage: 0
command usage:1
command-tree command usage:9
131