Show Environment - Dell S4810 Reference Manual

Version
8.3.19.0
Version
8.3.12.0
Version 8.3.11.1
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
E-Series
Example
Dell#show debug
Generic IP:
Dell#

show environment

View S-Series and Z-Series system component status (for example, temperature or voltage).
S4810
Syntax
show environment [all | fan | stack-unit unit-id | pem]
Parameters
all
fan
stack-unit unit-
id
pem
Command
•
Modes
•
134
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series
Original command.
IP packet debugging is on for
ManagementEthernet 0/0
Port-channel 1-2
Port-channel 5
GigabitEthernet 4/0-3,5-6,10-11,20
GigabitEthernet 5/0-1,5-6,10-11,15,17,19,21
ICMP packet debugging is on for
GigabitEthernet 5/0,2,4,6,8,10,12,14,16
Enter the keyword all to view all components.
Enter the keyword fan to view information on the fans. The
output of this command is chassis dependent.
Enter the keyword stack-unit then the unit-id to display
information on a specific stack member. The range is from 0
to 1.
Enter the keyword pem to view only information on power
entry modules.
EXEC
EXEC Privilege
Control and Monitoring