Show Power-Inline - Allied Telesis AT-IX5-28GPX Manual

P E C
OWER OVER THERNET OMMANDS
-
SHOW POWER INLINE

show power-inline

Overview This command displays the Power over Ethernet (PoE) status for all ports on the
Power Sourcing Equipment (PSE).
For information on filtering and saving command output, see "Controlling "show"
Command Output" in the
and Configuration
Syntax
show power-inline
Mode User Exec and Privileged Exec
Example To display the PoE status for all ports on the PSE, use the following command:
awplus#
Output Figure 14-2: Example output from the show power-inline command
awplus#show power-inline
PoE Status:
Stack Member 2
Nominal Power: 370W
Power Allocated: 246W
Actual Power Consumption: 151W
Operational Status: On
Power Usage Threshold: 80% (296W)
PoE Interface:
Interface Admin
port2.0.1 Enabled Low
port2.0.2 Enabled High Powered
port2.0.3 Enabled Low
port2.0.4 Enabled Crit Powered 14784
port2.0.5 Enabled Crit Powered
port2.0.6 Enabled High Powered
port2.0.7 Enabled Low
Table 14-1: Parameters in the show power-inline command output
C613-50057-01 REV A Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
Guide.
show power-inline
Pri Oper Power
Powered 3840
6720
Powered 14784
3840
6720
Powered 14784
Parameter
Nominal Power
Power Allocated
Actual Power
Consumption
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
"Getting Started with AlliedWare Plus" Feature Overview
Device Class Max(mW)
n/a 1
n/a 2
n/a 3 15400 [C]
n/a 3 15400 [C]
n/a 1
n/a 2
n/a 3 15400 [C]
Description
The nominal power available on the switch in watts (W).
The current power allocated in watts (W) that is available to
be drawn by any connected Powered Devices (PDs). This is
updated every 5 seconds.
The current power consumption in watts (W) drawn by all
connected Powered Devices (PDs). This is updated every 5
seconds.
4000 [C]
7000 [C]
4000 [C]
7000 [C]
577