Debug Dot1X - Allied Telesis AT-IX5-28GPX Manual

802.1X C
OMMANDS
1
DEBUG DOT X

debug dot1x

Overview Use this command to enable 802.1X IEEE Port-Based Network Access Control
troubleshooting functions.
Use the no variant of this command to disable this function.
Syntax
debug dot1x [all|auth-web|event|nsm|packet|timer]
no debug all dot1x
no debug dot1x [all|auth-web|event|nsm|packet|timer]
Mode Privileged Exec and Global Configuration
Usage This command without any parameters turns on normal 802.1X debug
information.
awplus#
awplus#
Examples
awplus#
awplus#
Related show debugging dot1x
Commands
undebug dot1x
1004 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
Parameter Description
Used with the no variant of this command exclusively; turns off all
all
debugging for 802.1X.
Specifies debugging for 802.1X auth-web information.
auth-web
Specifies debugging for 802.1X events.
events
Specifies debugging for NSM messages.
nsm
Specifies debugging for 802.1X packets.
packet
Specifies debugging for 802.1X timers.
timer
debug dot1x
show debugging dot1x
802.1X debugging status:
802.1X events debugging is
802.1X timer debugging is on
802.1X packets debugging is on
802.1X NSM debugging is on
debug dot1x
debug dot1x all
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
C613-50057-01 REV A