Match Ip-Precedence - Allied Telesis AT-IX5-28GPX Manual

Q S C
O OMMANDS
-
MATCH IP PRECEDENCE

match ip-precedence

Overview Use this command to identify IP precedence values as match criteria.
Use the no variant of this command to remove IP precedence values from a
class-map.
Syntax
match ip-precedence <0-7>
no match ip-precedence
Mode Class Map Configuration
Example To configure a class-map named cmap1 to match all IPv4 packets with a
precedence value of 5, use the commands:
awplus#
awplus(config)#
awplus(config-cmap)#
C613-50057-01 REV A Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
Parameter Description
The precedence value to be matched.
<0-7>
configure terminal
class-map cmap1
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
match ip-precedence 5
961