Match Tcp-Flags - Allied Telesis AT-IX5-28GPX Manual

Q S C
O OMMANDS
-
MATCH TCP FLAGS

match tcp-flags

Overview Sets one or more TCP flags (control bits) for a class-map to match on.
Use the no variant of this command to remove one or more TCP flags for a
class-map to match on.
Syntax
match tcp-flags {[ack][fin][psh][rst][syn][urg]}
no match tcp-flags {[ack][fin][rst][syn][urg]}
Mode Class Map Configuration
Examples To set the class-map's TCP flags to ack and syn, use the commands:
awplus#
awplus(config)#
awplus(config-cmap)#
To remove the TCP flags ack and rst, use the commands:
awplus#
awplus(config)#
awplus(config-cmap)#
C613-50057-01 REV A Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
Parameter Description
Acknowledge.
ack
Finish.
fin
Push
psh
Reset.
rst
Synchronize.
syn
Urgent.
urg
configure terminal
class-map
configure terminal
class-map
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
match tcp-flags ack syn
no match tcp-flags ack rst
963