Show Ip Igmp Groups - Allied Telesis AT-IX5-28GPX Manual

High availability, high power video surveillance poe switch

Hide thumbs Also See for AT-IX5-28GPX:

Table of Contents

SHOW IP IGMP GROUPS

show ip igmp groups

Use this command to display the multicast groups with receivers directly

connected to the router, and learned through IGMP.

For information on filtering and saving command output, see "Controlling "show"

Command Output" in the

and Configuration

show ip igmp groups [<ip-address>|<interface> detail]

User Exec and Privileged Exec

The following command displays local-membership information for all ports in all

Figure 20-2: Example output from the show ip igmp groups command

Table 20-1: Parameters in the output of the show ip igmp groups command

C613-50057-01 REV A

Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch

Address of the multicast group, entered in the form A.B.C.D.

<ip-address>

Interface name for which to display local information.

show ip igmp groups

IGMP Connected Group Membership

Group Address

224.100.100.100

228.249.13.8

235.80.68.83

239.255.255.250

239.255.255.254

Address of the multicast group.

Port through which the group is reachable.

The time in weeks, days, hours, minutes, and seconds that this

multicast group has been known to the device.

AlliedWare Plus™ Operating System - Version 5.4.5-0.x

"Getting Started with AlliedWare Plus" Feature Overview