Service Power-Inline - Allied Telesis AT-IX5-28GPX Manual

P E C
OWER OVER THERNET OMMANDS
-
SERVICE POWER INLINE

service power-inline

Overview This command enables Power over Ethernet (PoE) globally on the Power Sourcing
Equipment (PSE) for all PoE ports.
Syntax
service power-inline
no service power-inline
Default PoE functionality is enabled by default on the PSE.
Mode Global Configuration
Usage In a stack, issuing this command enables PoE globally for all PoE ports.
In a stack configuration, only stack members containing PoE hardware will have
PoE enabled by default in software.
Examples To disable PoE on the PSE, use the following commands:
awplus#
awplus(config)#
To re-enable PoE on the PSE, if PoE has been disabled, use the following
commands:
awplus#
awplus(config)#
Validation show power-inline
Commands
show running-config power-inline
C613-50057-01 REV A Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
configure terminal
no service power-inline
configure terminal
service power-inline
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
575