Show Vlan Classifier Group Interface - Allied Telesis AT-IX5-28GPX Manual

VLAN C
OMMANDS

SHOW VLAN CLASSIFIER GROUP INTERFACE

show vlan classifier group interface
Overview Use this command to display information about a single switch port interface for
all configured VLAN classifier groups.
Syntax
show vlan classifier group interface <switch-port>
Mode User Exec and Privileged Exec
Usage All configured VLAN classifier groups are shown for a single interface.
Example To display VLAN classifier group information for switch port interface port1.0.2,
enter the command:
awplus#
Output Figure 11-3: Example output from the show vlan classifier group interface
Related vlan classifier group
Commands
show vlan classifier interface group
424 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
Parameter Description
Specify the switch port interface classifier group identifier
<switch-port>
show vlan classifier group interface port1.0.2
port1.0.1 command:
vlan classifier group 1 interface port1.0.1
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
C613-50057-01 REV A