GVRP C
OMMANDS
SHOW GVRP CONFIGURATION
show gvrp configuration
Overview
Use this command to display GVRP configuration data for a switch.
For information on filtering and saving command output, see "Controlling "show"
Command Output" in the
and Configuration
Syntax
show gvrp configuration
Mode
User Exec and Privileged Exec
Example
To show GVRP configuration for the switch, enter the command:
awplus#
Output
The following is an output of this command displaying the GVRP configuration for
a switch:
awplus#show gvrp configuration
Global GVRP Configuration:
GVRP Feature: Enabled
Dynamic Vlan Creation: Disabled
Port based GVRP Configuration:
Port
GVRP Status Registration
----------------------------------------------------------------
port1.0.1 Enabled
port1.0.2 Enabled
C613-50057-01 REV A
Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
"Getting Started with AlliedWare Plus" Feature Overview
Guide.
show gvrp configuration
Applicant
Normal
Normal
Normal
Normal
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
Timers(centiseconds)
Join
Leave LeaveAll
20
60
1000
200
600
10000
599