Show Vlan - Allied Telesis AT-IX5-28GPX Manual

VLAN C
OMMANDS

SHOW VLAN

show vlan
Overview Use this command to display information about a particular VLAN by specifying
the VLAN ID. It displays information for all the VLANs configured.
Syntax
show vlan {all|brief|dynamic|static|auto|static-ports<1-4094>}
Mode User Exec and Privileged Exec
Example To display information about VLAN 2, use the command:
awplus#
Output Figure 11-2: Example output from the show vlan command
VLAN ID Name
======= ================ ======= ======= ====================================
2 VLAN0002
...
Related vlan
Commands
422 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
Parameter
<1-4094>
all
brief
dynamic
static
auto
static- ports
show vlan 2
Type State
STATIC ACTIVE
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
Description
Display information about the VLAN specified by the VLAN ID.
Display information about all VLANs on the device.
Display information about all VLANs on the device.
Display information about all VLANs learned dynamically.
Display information about all statically configured VLANs.
Display information about all auto-configured VLANs.
Display static egress/forbidden ports.
Member ports
(u)-Untagged, (t)-Tagged
port1.0.3(u) port1.0.4(u) port1.0.5(u)
port1.0.6(u)
C613-50057-01 REV A